Ribbon switches with a moisture-resistant design. They are commonly used as vehicle sensing switches.
This ribbon switch use Dri-Run cable which has non- fibrous fillers to eliminate wicking. Type 171-IS has an in-line moisture trap. The 171-IS can be used with RBMA sheathing to increase durability.
This ribbon switch has a high operating force of 160 oz. (44 N). Color Black
|Ribbon Switch Type
||Fastened with Duct Tape
||160 oz. (44 N)
||2 in. (50 mm) minimum
||18 AWG stranded, 10 ft. (3 M) long
||3/4 in. wide, 3/16 in.high (19.1 mm x 4.8 mm)
|Recommended Voltage & Current:
||24 VAC or VDC at 1 amp max.
||1000 VAC for 2 minutes
||0 to 122℃F (-18 to 50℃C)