General purpose ribbon switches designed for activation by hand, foot, or mechanical device. Available with sleeve ends or with block ends that have mounting holes (MT types). Block ends can have wire exiting from the end or back.
Actuation force 24 oz. (7 N), in colors yellow or black.
• Custom switch lengths
• Custom lead lengths
• Fail-Safe leads
• Air leak test
• Adhesive backing
• Interconnected switches (sausage style)
Custom colors are available on request. Please contact the factory.
| Ribbon Switch Type |
Style 106 Aluminum Channel |
DA-12 Double-Faced Tape |
Screws in Block Ends |
| 101-B |
Yes |
Yes |
No |
| 101-BMT |
Yes |
Yes |
Yes |
| Actuation Force: |
24 oz. (7 N) (10 mm Sphere) |
| Bending Radius: |
2 in. (51 mm) minimum |
| Exterior Covering: |
PVC |
| Color: |
Yellow or Black |
| Lead Wire: |
#18 AWG, 18 in. (460 mm) long (standard) |
| Dimensions: |
3/4 in. wide, 3/16 in. high (19.1 mm x 4.8 mm ) |
| Recommended Voltage & Current: |
24 VAC or VDC at 1 amp max. |
| Dielectric Resistance: |
1000 VAC for 2 minutes |
Product Reviews
No Reviews For This Product.
Login Status 