Products Image
Top Sellers Images

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login

Home » All Products

 Checkout
TP-2 Touchpad With Hold Down Plate

Details 

A 2 in. square, normally-open, momentary-contact switch. Highly water-resistant and suitable for outdoor applications. Operating force is 5 lbs.
Price: $49.00
58.56 CAD

141-BPH

Details 

General Purpose Ribbon Switches
General purpose ribbon switches designed for activation by hand, foot, or mechanical device. These switches have a PVC exterior. Sensitivity is 24 oz. and available in 1-15 ft. lengths with three different colors.
Please Note: Non-stock items require a 1 week lead time. Any switch larger than 1 ft. and/or has a lead wire longer than 18 in. is non-stock.
Price: Price: Please call

TS-47 Sensing Edge

Details 

Tapeswitch TS-47 Sensing Edges are designed for powered doors and other applications requiring the most sensitive switching and the fastest activation. Mounting is by means of snap-in channel that is available in three configurations: flat (aluminum or PVC) and with a straight or right-angle flange (aluminum only).
Please Note: All edges are custom made to order and require a 1 week lead time.
Price: Price: Please call

CVP Mat

Details 

CVP Switching Mats are designed for commercial control, signaling, and counting applications. They feature minimum thickness, maximum durability and low cost. These signal mats are flexible and conform to irregular surfaces, so installation is simple and straight-forward. They are water-resistant, but not immersible. Only 5 pounds of force is needed for operation.

Price: $51.25
61.25 CAD

PE Switch Runner

Details 

PE Switch Runner is for non-safety applications only. PE Switch Runner is only 3/32 in. thick and can be cut to any length with ordinary scissors. Available in 15 in. and 30 in. widths. Electrical connections can be made by twisting, crimping or soldering. PE Switching Runner strips are designed to provide area sensing for concealed indoor alarms and controls. They are intended for indoor use only and install on the floor under rugs, rubber runners, or matting. They can also be installed under plywood or Masonite.

Price: $176.75
211.23 CAD

TP-4 Touchpad With Hold Down Plate

Details 

A 4 in. square, normally-open, momentary-contact switch. Highly water-resistant and suitable for outdoor applications. Operating force is 5 lbs.
Price: $57.50
68.72 CAD

BPU-4 Blanking Programming Unit

Details 

Used to set up the beam blanking function in B-Series Light Curtains to accommodate fixed or floating objects in the beam field.
Price: $502.00
599.94 CAD

171-IS

Details 

Ribbon Switch with Special Environmental Properties
Ribbon switches with a moisture-resistant design. They are commonly used as vehicle sensing switches.This ribbon switch has a high operating force of 160 oz. (44 N). available in black only. Please Note: Non-stock items require a 1 week lead time. Any switch larger than 1 ft. and/or has a lead wire longer than 18 in. is non-stock.
Price: Price: Please call

TS-48 Sensing Edge

Details 

Tapeswitch TS-48 Sensing Edges are general purpose, medium profile, pressure sensitive safety edges. They have some compliance before activation, eliminating nuisance tripping, and provide about of overtravel cushioning after activation. These safety edges also exhibit excellent side activation.
Please Note: All edges are custom made to order and require a 1 week lead time.
Price: Price: Please call

NO-1 Sensing Cell

Details 

A low-profile, normally-open, momentary-contact wafer switch. Round shape with 1.5 in. (38 mm) diameter. Operating force is 2.5 lbs. (11 N).

Quantity pricing available
1 - 9 @ $14.75 each
10 - 24 @ $14.00 each
25+ @ $13.25 each
Price: $15.25
18.23 CAD

180 FLEXswitch

Details 

Ribbon Switch with Special Physical Properties
Ribbon switch with a patented snap-action design that operates when flexed at any point. Switch measures 9/16 in. wide X 5/32 in. high with an actuation force of 8oz. Color Red. Available in 1-10 ft. lengths.
Please Note: Non-stock items require a 1 week lead time. Any switch larger than 1 ft. and/or has a lead wire longer than 18 in. is non-stock.
Price: Price: Please call

TS-57 Sensing Edge

Details 

Tapeswitch TS-57 Sensing Edges are designed for powered doors and other applications requiring the most sensitive switching and the fastest activation. This pressure sensitive safety edges differ from the TS-47 mainly in overall height and the amount of overtravel cushioning.
Please Note: All edges are custom made to order and require a 1 week lead time.
Price: Price: Please call

NO-1 Holder

Details 

Metal holder for NO-1 Sensing Cell (Switch not included).
Price: $3.00
3.59 CAD

NO-1R Sensing Cell

Details 

A low-profile, normally-open, momentary-contact wafer switch. Rectangular shape: 1.0 in. x .75 in. (25 mm x 19 mm). Operating force is 2.5 lbs. (11 N).
Price: $15.25
18.23 CAD

191-S

Details 

Ribbon Switch with Special Environmental Properties
These ribbon switches have stainless steel conductors. This ribbon switch is suitable for underwater applications. Sensitivity is 12 oz (3 N). Switch color is beige and Available in 1-10ft lengths.
Please Note: Non-stock items require a 1 week lead time. Any switch larger than 1ft and/or has a lead wire longer than 18" is non-stock.
Price: Price: Please call

NO-1R Holder

Details 

Metal holder for NO-1R Sensing Cell (Switch not included).
Price: $3.00
3.59 CAD

« | 1 | 2 | 3 | Next »

Copyright © 2010, Tapeswitch Corporation All rights reserved.