A 50 ft roll of Type 131-A ribbon switch. General purpose, ¾” wide ribbon switch for activation by hand, foot, or mechanical device. Sensitivity is 60 oz (17 N).

A 50 ft roll of Type 101-B ribbon switch. General purpose, ¾” wide ribbon switch for activation by hand, foot, or mechanical device. Sensitivity is 24 oz (7 N).

A 50 ft roll of Type 121-BP ribbon switch. General purpose switch is 9/16” wide x 5/32" high with low actuating bead. For activation by hand, foot, or mechanical device. Sensitivity is 8 oz (2 N).

A 50 ft roll of Type 141-BPH ribbon switch. General purpose switch is 9/16” wide x 9/32" high with high actuating bead. For activation by hand, foot, or mechanical device. Sensitivity of 8 oz (2 N).

For use with Types 102-A and 102-B bulk ribbon switch. These molded pieces include feed-through connectors and allow the construction of rectangular layouts. Available in colors matching each type of switch.

For use with Types 102-A and 102-B bulk ribbon switch. These molded pieces include feed-through connectors and allow the construction of branching layouts. Available in colors matching each type of switch.

For use with Types 102-BP and 102-BPH bulk ribbon switch. The ribbon switch can be snapped or pressed into the channel or slid in from one end. Available lengths are 3 ft (0.9 m) and 6 ft (1.8 m) with pre-punched 5/32" holes on 7" centers.

Mounting Channel for 102-A, 102-B bulk ribbon switch. Available in 3ft and 6 ft lengths.

For use with Types 102-A and 102-B bulk ribbon switch. This is a thick foam tape with a special adhesive on each side which will not interact with the PVC switch housing. It can be used for temporary indoor installations. Each roll is 3/4" x 50 ft.

For use with Types 102-BP and 102-BPH bulk ribbon switch. This is a thick foam tape with a special adhesive on each side which will not interact with the PVC switch housing. It can be used for temporary indoor installations. Each roll is 9/16" x 50 ft

For use with Type 102-A bulk ribbon switch. Each set consists of one “live” end with an 18” lead, and one “dead” end with no electrical connection.

For use with Type 102-B bulk ribbon switch. Each set consists of one “live” end with an 18” lead, and one “dead” end with no electrical connection.

For use with Type 102-BP bulk ribbon switch. Each set consists of one “live” end with an 18” lead, and one “dead” end with no electrical connection.

For use with Type 102-BPH bulk ribbon switch. Each set consists of one “live” end with an 18” lead, and one “dead” end with no electrical connection.

Mat size: 14X77

Color: BLACK

Industrial-duty, pressure-sensitive mat designed for personnel sensing and suitable for incidental vehicle traffic. Moisture and abrasion resistant. Requires no special floor preparation or add-on metal edging. Includes 4-lead fail-safe wiring. Click Details for lead location.

Mat size: 12X48

Color: BLACK

Industrial-duty, pressure-sensitive mat designed for personnel sensing and suitable for incidental vehicle traffic. Moisture and abrasion resistant. Requires no special floor preparation or add-on metal edging. Includes 4-lead fail-safe wiring. Click Details for lead location.

Mat size: 36X48

Color: BLACK

Industrial-duty, pressure-sensitive mat designed for personnel sensing and suitable for incidental vehicle traffic. Moisture and abrasion resistant. Requires no special floor preparation or add-on metal edging. Includes 4-lead fail-safe wiring. Click Details for lead location.

Mat size: 313/4X313/4

Color: BLACK

Safety mats with an internal impact-resistant, penetration-resistant barrier. Withstand abuse that would destroy ordinary pressure-sensitive mats. Requires no special floor preparation or add-on metal edging. Includes 4-lead fail-safe wiring. Click Details for lead location.