Products Image
Top Sellers Images


Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
Login Status  Login Status

Not logged in

» Login

Home » Edges

 Checkout
TS-46 Sensing Edge
TS-46 Sensing Edge
TS-46 Sensing Edges
Medium profile, pressure sensitive safety edges with a crimp-on
mounting, some compliance before actuation, and 3/4 in. overtravel

Tapeswitch TS-46 Sensing Edges are general purpose, medium profile, pressure sensitive safety edges. They have some compliance before activation, eliminating nuisance tripping, and provide about 3/4 in. of overtravel cushioning after activation. These safety edges also exhibit excellent side activation. Mounting is in crimpable aluminum channel (flat or angle), which is more tamper-resistant than snap-in channel.

The Santoprene TPE housing is resistant to water, oil, hydraulic fluids, and coolants. The internal switching element is rated for 3 million operations at any point. All TS-46 Pressure Sensitive Sensing Edges are supplied with 4-lead Fail-Safe wiring and are compatible with Tapeswitch Safety Controllers.

Features & Benefits
Typical Applications
  • Compliance before activation eliminates nuisance tripping
  • 3/4 in. over travel provides cushioning after activation
  • Excellent side activation properties
  • 4-lead Fail-Safe wiring is standard
  • Obstruction detection on power operated doors, gates, and stage lifts
  • Collision detection on moving conveyors or platforms
  • General applications for small sensing bumpers
For more information Click Here
Specifications for TS-46 Sensing Edges
Actuation Force 10 lbs. (44 N) nominal
Overtravel 0.75 in. (19 mm) after activation
Recommended Voltage & Current 28 VAC or VDC at 1.0 amps max.
Lead Wiring 2 x 20/2 AWG, Dri-Run, 72 in. long, 3/16in. dia.
Exterior Housing Santoprene TPE
Available Lengths 6 in. to 16 ft.
Environment IP67, -30 to 170F (-34 to 77C)
Mounting Options Aluminum crimpable channel (flat or angle)
* The TS-46 Sensing Edge has the same properties as the TS-48 Sesning Edge, but has a different mounting style.
Please Note: All edges are custom made to order and require a 1 week lead time.
 
Price: Price: Please call

 
« Previous | Next »

Copyright © 2010, Tapeswitch Corporation All rights reserved.