Logo

 

PSSR/2 Safety Interface Module
Home / Safety Interface Modules / PSSR - Safety Control Unit
PSSR/2
 
  • Description
  • Features & Applications
  • Specifications
  • Manuals & Catalogs
  • Drawings
  • Suggested Products
  • Buy Online
The PSSR/2 control unit is designed to be used in conjunction with Tapeswitch pressure sensitive sensor products to make a complete safety system. Sensors may take the form of safety mats, sensing edges, bumpers, or ribbon switches but must incorporate an integral end of the line resister.

When the PSSR/2 is used with suitable Tapeswitch sensing edges, bumpers, switches or mats the system meets the requirements of EN13849-1:2006 PLd, EN62061 SIL2 and is a Category 3 configuration. It is an extremely compact unit which has a 22.5 mm DIN rail enclosure ideal for mounting in control panels. The PSSR/2 has a manual or auto reset function and operates from 24 VDC.
•   Works with all mats, edges, bumpers, and switches
•   Category 3 PLd SIL2
•   End of line resistor monitoring
•   DIN rail mounted
•   24 VDC supply voltage
•   Manual or auto reset
•   Self-monitoring
•   3 Output contacts
Safety Performance Level Category 3, PLd (EN13849-1:2008)
Probability Of Dangerous Failures Per Hour (PFHd) 1.03 x 10-7
Power Consumption < 5 VA
Response Time 13 ms
Temperature Range 14 to 131°F (-10 to 55°C)
Reset Function Auto or Manual
Supply Voltage 24 VAC or VDC
Safety Outputs Device
Type Contacts
Rating
Safety relay, Force guided relays
2 x N/O, 1 x N/C (monitor)
5 A @ 240 VAC
Maximum Sensor Length 100 M (330 ft.)
Enclosure Protection Rating IP20
Dimensions 3.31 in. high x 4.68 in. length x .88 in. wide
Not Available
Not Available
Not Available
Customer Service 1-800-234-8273
USA LinkCanada LinkUnited Kindom LinkGerman LinkJapan LinkBrasil Link © 2014 Tapeswitch Corporation