| Home > Non-Contact > F-Series |
 |
| Description |
The F-SERIES is a uniquely flexible DIN rail mounting safety control unit designed for monitoring up to 30 safety switches.
The main control module (FM1) contains the power supply, dual safety contacts and a monitoring circuit for easy integration into your control circuits along with the input and indication for one safety switch.
The extender modules provide inputs for 1 (FX1) or 2 (FX2) Mechan safety switches and provide both LED and volt free contact indication from each of the safety switches enabling fast, easy diagnosis of open gates or faults.
Mechan safety switches are available in a variety of sizes to suit all applications. They are tamper-proof, i.e. only a Mechan actuator will operate the system, and with an 8-10mm switching distance, they are easy to install, tolerant to misalignment and guard wear. Designed to withstand the harshest environments, the electronic switching is encapsulated into an ABS housing making the Mechan safety switches immune to water, hot hosing, dust or oil etc. |
| Features |
|
Tamper-proof, safety switches
Multi-gate monitoring system
Category 3 or 4 safety system performance
Guard status indication
35mm DIN rail mounting control units
EMC tested
Compliant with relevant EU Directives
Up to 500,000 unique codes available
|
| Operation |
| When the safety switch actuator is brought within the operating range of the sensor (8-10mm target to target), a signal is generated and transmitted to the safety control unit. The control unit evaluates this signal and if all monitored gates are closed and the control module’s internal self-check is completed, the safety contacts will close. |
| FM1 Safety Control Unit |
 |
EN 954-1 Category 4
Modular system, monitors up to 30 guards
Tamper resistant safety switches
Indication from each safety switch
Simple to install and expand
|
| More Details |
| FX2 Safety Extender Module |
 |
2 Safety Switch extender module
17.5mm slim-line housing
LED indication
Volt free contact indication
|
| More Details |
| FX1 Safety Extender Module |
|
1 Gate safety switch extender module
17.5mm slim-line housing
LED indication
Volt free contact indication
|
| More Details |
| FMA F-Type Safety Switch |
 |
Electronic Switching
IP67 Safety Switch
10mm Switching distance
5, 10 or 15 meter cable pre-wired
Extend cable up to 100 meters |
| More Details |
| FMG F-Type Safety Switch |
 |
Electronic switching
IP67 Safety Switch
10mm Switching distance
5, 10 or 15 meter cable pre-wired
Extend cable up to 100 meters |
| More Details |
| FMT F-Type Safety Switch |
 |
Electronic switching
IP67 Safety Switch
10mm Switching distance
5, 10 or 15 meter cable pre-wired
Extend cable up to 100 meters
|
| More Details |
| BMR B-Type Safety Switch |
 |
Electronic switching
Small size, IP67 Safety Switch
10mm Switching distance
5, 10 or 15 metercable pre-wired
Extend cable up to 100 meters
|
| More Details |
| DINKY Safety Switches |
 |
Electromic switching
Miniature, IP67 Safety Switch
10mm Switching distance
5, 10 or 15 meter cable pre-wired
Extend cable up to 100 meters
|
| More Details |
| |
